| Bug Descriptions |
| 1. |
JDL: Setting created
on the JXCON may not be downloaded to the hardware unit. |
| 2. |
JT, JR, JDL: Temperature
unit K may not be downloaded to the hardware units. |
| 3. |
The temperature unit
(ITEM 21) setting may not be changed for the JT or the JR if these
hardware units are selected after the function setting (ITEM 10) for
the JDL has been specified 'FX : Linearizer.' |
| 4. |
M8XV2,
M8XT2, M8XR2, M8XM2: The input type (ITEM 10) may be incorrectly indicated
when the information is uploaded from the hardware units. |
| 5. |
M8XT2, M8XR2: Setting
created on the JXCON may not be correctly downloded to the hardware
unit. |
| 6. |
JF (Item 11) : May not read/write corretly the parameter of 'Square root extraction for input X1.' |
| 7. |
JPA, JS, JDL, M2XU, M2XUM, M2XPA, M2XPA2, M2XRP2, M8XV2, M8XT2, M8XR2, M8XM2: May not read the linearization data when opening the saved file with OPEN button after setting linearization data and clicking SAVE button. |
| 8. |
JUA: When setpoint for Alarm Output (Item 26, 29) and hysteresis for Alarm Output (Item 27, 30) are set with setting unit for alarm (Item 38, 39) to engineering unit and then after performing ‘Saving Parameter as a File’,‘Reading Parameters from a File’ is performed to the file, the value for setpoint for Alarm Output (Item 26, 29) and hysteresis for Alarm Output (Item 27, 30) is changed. M2XU and M2XUM: The error message ‘empty item’ is displayed when download is performed with correct setting vlue. |
| 9. |
Windows 7 and Windows 8 are supported. |
|
| Model No. |
JXCON |
| Version |
V.12.09 |
| OS |
Windows 2000, Windows XP, Windows 7 (32 bit, 64 bit) , Windows 8 (32 bit, 64 bit) |
| Required hardware |
Serial port (COM1 through 4)
Minimum hard disk area: 5 MB
Minimum required RAM: 16 MB |
| Release Date |
April 24, 2014 |
| File ID |
ZIP Archive: JXCON_UPDATE_R5E.zip |
| File Size |
8.00 MB |
| |
 |
ZIP Archive
 |
|
|