Services & Support > Software Download & Upgrade > M6CFG
M6CFG: M6 Configurator Software
M6CFG Configurator Software is used to monitor and set parameters for M6 Series Programmable Transmitters.


Press DOWNLOAD button for the ZIP archive file (M6CFG_R9.zip) and save the archive on any folder you like.

Use an uncompressing tool to expand the downloaded archive.


For installing and using the M6CFG Software, please refer to the M6CFG Users Manual. PDF

< NOTE >
When programming a M6 module using the M6CFG, PC Configurator Cable (model: MCN-CON or COP-US) is required to connect the module to a PC.
Model No. M6CFG
Version
1.65  
Applicable M6 Modules M6xXU, M6xXV, M6xXT, M6xXR, M6xXM, M6xXAS, M6xXAR, M6xXAT, M6xXAP, M6xXF1, M6xXF2, M6xXF3
OS Windows 10(32bit/64bit),
Windows 8.1(32bit/64bit),
System Serial port (COM1 through COM16) or USB Port
RAM must satisfy the operating system’s requirements.
Minimum free hard disk area 10 MB
Release Date November 02, 2018
File ID ZIP Archive: M6CFG_R9.zip
File Size 1.4 MB
 
CANCEL		 ZIP Archive
DOWNLOAD NOW