Download > Software Download & Upgrade > TRGCFG
TRGCFG: TR30-G PC Configurator Software
The TRGCFG PC Configurator Software is used to change and save configuration data and to perform maintenance for TR30-G via a PC.

Press DOWNLOAD button for the ZIP archive file (TRGCFG_EG_V25.zip) and save the archive on any folder you like.

Use an uncompressing tool to expand the downloaded archive.

For installing and using the TRGCFG Software, please refer to the TR30-G Users Manual.

< Downloading USB driver software >
• In order to connect a PC with TRGCFG and TR30-G, TR30 USB Driver software is required beside TRGCFG. Install TRGCFG configurator software and TR30 USB Driver software in the PC.

→ In downloading the R30/TR30 USB Driver

< NOTE >
In order to connect a PC with TRGCFG and the TR30-G via USB, a USB cable (TypeA – MinB) is required.
Model No. TRGCFG
Version
2.5.24  
Applicable Modules TR30-G
OS Windows 10 (32 bit/64 bit) except Windows RT
Windows 11
The software may not operate adequately in certain conditions.
System USB Port (COM1 through COM20)
RJ-45 connector for Ethernet
RAM must satisfy the operating system's requirements.
Release Date August 01, 2024
File ID ZIP Archive: TRGCFG_EG_V25.zip
File Size 475 KB


CANCEL		 ZIP Archive
DOWNLOAD NOW