R6 Series

• Only 78 mm (3.07 in) wide with the minimum system of 8 modules (for R6S / R6D)
• Selectable connection method Tension-Clamp, Screw terminal or Euro terminal
• Analog I/O range selectable with the built-in DIP switches
• Low power consumption

R7 Series

• Palm-top size compact module can handle 4 analog input, 2 analog output or 8/16 discrete signals
• 8 or 16 discrete input/output module can be attached to the base module
• 1500 Vac isolation

R7K4FE Series

• Modbus/TCP (Ethernet) I/O module, R7K4FE interfaces discrete I/Os and PLC or PC via Modbus/TCP (Ethernet) .
• Removable terminal blocks make the module replaceable without disconnection of wiring.

R7K4FML3 Series

• MECHATROLINK I/O module, R7K4FML3 interfaces discrete I/Os and PLC or PC via MECHATROLINK-III.
• Removable terminal blocks make the module replaceable without disconnection of wiring.

R7K4JML3 Series

• MECHATROLINK I/O module, R7K4JML3 interfaces discrete I/Os and PLC or PC via MECHATROLINK-III.
• Tension clamp terminal block for I/O.

R7G4FML3 Series

• MECHATROLINK I/O module, R7G4FML3 interfaces discrete I/Os and PLC or PC via MECHATROLINK-III.
• Removable terminal blocks make the module replaceable without disconnection of wiring. (Screw terminal block)

R7G4HML3 Series

• MECHATROLINK I/O module, R7G4HML3 interfaces discrete I/Os and PLC or PC via MECHATROLINK-III.
• Removable terminal blocks make the module replaceable without disconnection of wiring.

R7F4HML3 Series

• MECHATROLINK I/O module, R7F4HML3 interfaces discrete I/Os and PLC or PC via MECHATROLINK-III.
• MIL connector for I/O

R7K4FML Series

• R7K4FML, complying with MECHATROLINK–I/–II and Simple I/O, interfaces discrete I/Os and PLC or PC via MECHATROLINK.
• Removable terminal blocks make the module replaceable without disconnection of wiring.

R7K4DML Series

• R7K4DML, complying with MECHATROLINK-I/-II Simple I/O specifications, interfaces discrete I/Os via PLC or PC, and MECHATROLINK.
• e-CON (mini-clamp) connector for I/O

R7G4HML Series

• MECHATROLINK I/O module, R7G4HML interfaces discrete I/Os and PLC or PC via MECHATROLINK-I/-II.
• Removable terminal blocks make the module replaceable without disconnection of wiring.

R7I4DECT Series

• The R7I4DECT interfaces between I/O signals and a PLC via EtherCAT.
  EtherCAT is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
• e-CON (mini-clamp) connector for I/O

R7F4HEIP Series

• Interfaces PLC (programmable logic controller) and discrete I/Os via EtherNet/IP.
• Supports DLR (Device Level Ring) to form a ring topology.
• Tension clamp terminal block for I/O.

R7G4HEIP Series

• Interfaces PLC (programmable logic controller) and discrete I/Os via EtherNet/IP.
• Supports DLR (Device Level Ring) to form a ring topology.
• Employs a removable two-piece terminal block that allows module replacement without disconnecting wiring.

R7F4DH Series

• Compact, all-in-one package
• 16 discrete inputs or outputs and 8 discrete I/O modules selectable
• Easy-to-wire connection typically used for machinery control:
  - Mini-clamp (e-CON) connector
  - MIL connector
  - Spring cage (tension clamp) type terminal

R7K4DH Series

• HLS (Hi-speed Link System) for FA Machinery Control
• The R7K4DH interfaces discrete I/O signals with a PLC via HLS (HLS is the abbreviation for "Hi-speed Link System" of Step Technica Co., Ltd.)
• e-CON (mini-clamp) connector for I/O

R7G4HH Series

• The R7G4HH interfaces analog I/O signals with a PLC via HLS. (HLS is the abbreviation for “Hi-speed Link System” of Step Technica Co., Ltd.)
• High-speed response
• Ch-to-ch isolation
• Removable terminal blocks make the module replaceable without disconnection of wiring.

R3 Series

• Wide selection of I/O modules including DC, AC, temperature, strain gauge, pulse trains, AC power, etc.
• Selections of AC power, CT and VT modules suitable for energy monitoring applications
• Dual redundant communication networks and power supplies

R30 Series

• Compact size
• High speed bus
• Wide selection of I/O modules and network modules

*1: Various network modules will be available in the near future.

R80 Series

• 'Slice type' modules can be freely added by necessary number of I/O points, saving installation space to the minimum
  
• Only 55 mm deep modules (except connector)
• Easy I/O terminal access via e-CON (mini-clamp) connector or MIL connector

R8 Series

• 'Slice type' modules can be freely added by necessary number of I/O points, saving installation space to the minimum
  
• Only 55 mm deep modules (except connector)
• Easy I/O terminal access via e-CON (mini-clamp) connector or MIL connector

R5 Series

• Free combination of I/O modules, network modules and power modules
• Dual redundant communication networks and power supplies
• 2 fully-isolated analog I/O per module
• Re-transmitted output modules suitable for extra field monitoring

R10 Series

• Plug-in construction
• Universal input configurable to T/C, RTD,potentiometer, resistor,
  DC current or voltage independently (R10M-US2)
• Easy-to-install clamp-on type current sensor without needing a current transformer (R10M-CT4E)
• Modbus-RTU protocol communication
• High-density mounting
• Installation base (model: R10-BS)

R1 Series

• Economical all-in-one module for Modbus, DeviceNet and CC-Link
• 12-point universal input module
• 8-point RTD/Pot input module
• 4-point totalized counter input, 8 contact I/O module
• 32-point discrete I/O modules
• Trigger contact input and alarm contact output

	R1M Series
	R1C,R1D Series
	RZMS Series

HUB Module

• The HUB Module extends total length of network cable and branch cable.

CC-Link Master Module

• Yokogawa Electric PLC (FA-M3V) use.
• CC-Link: Ver. 1.10/2.00
• Supported slave station: Remote I/O station,
  Remote device station
• Configurator software (model: FAMCLCFG)

WL40F Series

• WL40F Series Licence-free 900 MHz ISM band
• FCC Part 15 compliant wireless module^*
• Modbus-RTU transparent gateway and I/O
• Multi-hop technology solves various challenges of implementing a reliable wireless communication network.
• Supporting of low-speed moving devices makes the WL40F Series ideal for data gathering for AGVs.

* This device is approved for use only in the US.

WL40TH Series

• WL40TH Series Licence-free 920 MHz ISM band
• NBTC, Thailand Radio Waves Act wireless module^*
• Modbus-RTU transparent gateway and I/O
• Multi-hop technology solves various challenges of implementing a reliable wireless communication network.
• Supporting of low-speed moving devices makes the WL40TH Series ideal for data gathering for AGVs.

* This device is approved for use only in Thailand.

WL40VN Series

• WL40VN Series Licence-free 920 MHz ISM band
• QCVN 47: 2015 / BTTTT
  QCVN 96: 2015 / BTTTT wireless module^*
• Modbus-RTU transparent gateway and I/O
• Multi-hop technology solves various challenges of implementing a reliable wireless communication network.
• Supporting of low-speed moving devices makes the WL40VN Series ideal for data gathering for AGVs.

* This device is approved for use only in Vietnam.

WL40TW Series

• WL40TW Series Licence-free 920 MHz ISM band
• NCC Taiwan Radio Wave Regulatory
• Modbus-RTU transparent gateway and I/O
• Multi-hop technology solves various challenges of implementing a reliable wireless communication network.
• Supporting of low-speed moving devices makes the WL40TW Series ideal for data gathering for AGVs.

* This device is approved for use only in Taiwan.