Optional Specifications / Special Specifications | Products

Optional Specifications

How to Designate Optional Specifications

Optional specifications are available to meet various requirements, including coating designation.
If you want to specify an option, write “/ Q” at the end of the order code.
Then enter the optional specifications separately from the order code.

Order code (example)

blank	:	none
/Q	:	Option other than the above

Optional Specifications code (example)
Optional Specifications /C01/V01

SPECIFICATIONS OF OPTION: Q
(multiple items can be specified)

COATING
/C01	:	Silicone Coating
/C02	:	Polyurethane Coating
/C03	:	Rubber Coating
/C04	:	Polyolefin Coating
ADJUSTMENT
/V01	:	Multi-turn trimmer for fine adjustment
/VN	:	Sealed adjustment holes
Terminal screw material
/S01	:	Stainless steel

· The presence or absence of optional specifications and the supported content differ depending on the model. For details, see the datasheet.

Coating

You can choose from four types according to your needs.

Silicone Coating (/C01)

Product Name:: Pelgan Z Spray or 1-2577
Manufacturer:: Dow Toray Co., Ltd. (Pelgan Z Spray)
The Dow Chemical Company (1-2577)
Feature:: Improvement in moisture prevention, insulation property, and nonflammability

Pelgan Z Spray and 1-2577 are of the same specifications distributed by Dow Toray Co., Ltd. inside Japan.

Polyurethane Coating (/C02)

Product Name:: HumiSeal
Model Designation:: 1A27NS
Manufacturer:: Chase Corp.
Feature:: Improvement in moisture prevention, insulation property, and nonflammability

Rubber Coating (/C03)

Product Name:: Plasti Dip Spray Red
Manufacturer:: Plasti Dip International Inc.
Feature:: Improvement in corrosion prevention and insulation property

Polyolefin Coating (/C04)

Product Name:: HumiSeal
Model Designation:: 1B59LU
Manufacturer:: Chase Corp.
Feature:: Improvement in moisture prevention, insulation property, and nonflammability

Specifications and coating materials may change without notice.

Trimmer

You can choose the multi-turn type according to your needs.

Multi-turn trimmer for fine adjustment (/V01)
While the standard potentuometer rotates 260°, the multi-turn potentiometer is suitable for finer adjustments.

Multi-turn trimmer for fine adjustment
Standard trimmer

The trimmer used may change without notice.

Terminal screw material

You can choose the stainless-steel type according to your needs.

Stainless steel (/S01)
Stainless steel has excellent environmental resistance, including resistance to corrosive gases, compared with nickel-plated iron used for normal terminal screws.

Stainless steel screws
Nickel-plated iron screws

The screws used may change without notice.

Special Specifications

No additional charges

The special specification example which the legs of a leaded part are reinforced with a special kind of resin for the vibration countermeasure.

We strive toward complete offerings with special specification products.

We offer an enormous selection of signal conditioners and remote I/Os, power monitors, paperless recorders, panel meters, surge suppressors and valve actuators, and even that may not be enough for your particular needs. But do not give up easily. Just ask us. We continue to work toward full product offerings with special specifications without additional charge, starting with major product series. In addition, we put our effort to make them into standard selections so that they are more easily accessible to you and everyone else in the future.

Various special specifications (request examples from customers)

The range does not match with that of the standard specificationWe want to set the ranges of input signal and output signal to the ones not included in the existing code.
Different power supply voltageWe want to use the power supply compatible with the special CVCF (constant voltage and constant frequency unit). We want to match a marine power supply.
We want to combine with the special sensorWe want to combine with special sensor or thermistor not included in the standard.
We want an external volumeWe want to attach the volume to adjust the bias of the ratio conditioner onto the control panel surface.

Technical inquiries are also quickly responded.

Inquiries are answered promptly.

The Design Department needs to conduct a technical examination to see whether the special specifications you have inquired about can be manufactured.
We respond to you with a technical review as soon as possible.

Special specifications will be standardized.

The special specifications you ordered will be standardized in sequence.

We will standardize the special specification items, beginning with the ones most requested. Once they are standardized, you will no longer need troublesome meetings or specification check when you place an order.